Ponudba je bila dodana kot priljubljena. Kadarkoli si jo lahko ogledate v »tpWeb.frontend.bp.navigation.link.myBauportal > Seznam za ogled«.
Conrad-StorkDAF 2300 6x4
Cena po ponudbi
7317AZ Apeldoorn, Nizozemska
Interna sklicna številka
Aantal eigenaren: 1
Algemene staat: goed
Technische staat: goed
Optische staat: goed
Neem voor meer informatie contact op met John van Tongeren (+31 6 20537017, firstname.lastname@example.org)
Technical specification truck mounted Conrad Combi 71 equipped for reverse circulation, airlift and straight flush drilling.
Conrad Combi 71 drilling rig, mounted on a DAF 2300 6 x 4 truck,
The truck is from the year 1985.
- equipped with four hydraulically operated levelling jacks. Two at the front and two at the rear side of the rig.
A2. Hydraulic system
- hydraulic pump set, powered by separate powerpack with 60 kw Deutz EL6912
- pump powers a rational designed hydraulic circuit, including oil tank, filters, pressure gauges and operating valves, providing the required power for all
- system equipped with an oil cooler for controlling the operating temperature of
the hydraulic oil.
- the oil tank is equipped with two tank top return filters with visual dirt indicators.
A3. Drilling mast
- hydraulic raised and lowered by chain driven.
- the mast will be suitable to handle threaded drill-pipes with a length of 4 meter.
A4. Pull-up/Pull-down system
- a hydraulic motor actuates the up and down movement of the top drive in the mast
- pull-up : 4500 daN
- stroke : approximately 4.6 meter.
- the top drive-support allows horizontal tilting over an angle of 70° (hydraulically) of the top drive in the lower position for easy handling, coupling and uncoupling
of the drill-pipes.
- furthermore the power swivel can be hinged sideways (hydraulically) to give free
access to the bore-hole.
- drill head carrier is equipped with hydraulic weight compensation system to prevent damage of tool joint threads during coupling and uncoupling.
- free downwards travel movement of the top drive support is included.
A5. Top drive (drill head)
- maximum torque : 600 kgm
- maximum speed : 60 rpm
- passage : 6 inch (150 mm.)
- direction of rotation is reversible
- driven by 2 hydraulic motors.
A6. Breakout device.
- Manual breakout device, manual operated, for drillpipes directly mounted under
A7. Main winch
- hydraulic operated winch, max. line pull 600 daN on first layer.
A8. Bottom clamp
- Hydraulic operated drill pipe clamp, mounted at lower part of the mast.
A10. Central control panel
- fixed control panel with a drillers platform (drillers stand), situated at the rear left side of the rig to make that all drilling controls are conveniently and practically located.
- Includes engine controls, engine warning lights, hydraulic pressure gauges, hydraulic operation valves and emergency stop.
A11. straight flush pump
Hydraulic driven BBA CL80/100 centrifugal pump for straight flush drillings, self priming lift, capacity approximately 100 m3/h at 8 bar.
Dutch MOT( APK) of the Truck : 01-2020
Dutch TUV on the drilling rig : 01-2020
This offer includes :
- Drill tubes: suction drill tubes 6 '' with air lift approximately 15 x 3 M tube
- Straight flusch pipe: 10 x 4 meters
- 2 x drill head for suction drills
-2 x drill head for straight flusch drills
- Drill boxes/sinks voor drilling , 2 pices
- all the necessities for the machine to be drilled, think of clamps etc etc
Resterend profiel voorbanden: 65
Resterend profiel achterbanden: 65
Laatste inspectie: 04-01-2019
Brezplačno in brez obveznosti - prejmite ponudbo za prevoz od logističnih partnerjev baupool